Manual Electrostatic Spray Gun - Fine Atomisation/High Coating Efficiency/Easy to Use (ME-2)

Electrostatic gun is the basic product of industrial spraying equipment. In the coating process line, the electrostatic spray gun is the main body of the surface treatment of the core equipment, it is through the use of low-pressure high atomisation device and through the electrostatic generator to produce electrostatic field force efficient and fast coating of the coating to the surface , So that the coating to achieve the perfect surface treatment, so the electrostatic spray gun is grounded as a positive electrode, paint atomization device for the negative electrode, and the coating atomization device with high negative voltage, made between the two The electrostatic field allows the atomized coating particles to be negatively charged, so that the coating is effectively adsorbed on the opposite electrode by the method of the surface of the electrostatic coating.
So why is it going to be painted as a positive electrode and the paint atomizer is made of negative? It is, on the other hand, its transfer to spark discharge is more unsafe.
In order to carry out electrostatic coating, the coating of the ground is an important must be conditions, that coating must be a good conductor of electrical. Wood is usually considered a bad conductor, but its moisture content of 8% or more, you can practice electrostatic coating, and experience has also been confirmed.
This is the usual electrostatic coating, the current between the positive and negative dip current is 20 ~ 50 microamps (MICRO-AMPERE), very small, so although it is like wood, the larger resistance of the object can also be implemented Electrostatic coating.

All the data in the table are collected from CNISOO / CNSEIKO laboratory. The test fluid is tap water with PH = 7, the coating pressure is 1Bar, and the pipeline is directly connected. The atomized particle data is laser diffraction.
Form 1:

CNISOO brand was founded in 2004, after 20 years, focusing on the development of non-standard coating process and peripheral equipment and parts in the coating industry. With independent intellectual property rights of processing technology and professional fluid research and development experience. Excellent R&D experience in gaseous and liquid mixed fluids. Products include spray gun, fluid transfer, spray control system, special spraying workstation, new environmental protection paint mist treatment station, valet design spraying process, spray system upgrade and other service areas. It has a number of patents and belongs to national high-tech enterprises. At the same time, it is a spray R&D partner of many universities.
The products are widely used and solve the complex process of glaze, water-based spraying, enamel, ceramic glaze and other applications . It also solves the application problems of intelligent micro workstation for multiple automotive spraying processes.
The company has proofing research and development equipment,which can quickly mold experimental spraying new concepts. With its own R & D team, we can develop customized spraying tools and systems to meet the market demand.

Manual liquid electrostatic spray gun, standard equipment includes air regulator vale, electrostatic host, electrostatic spray gun and a group of white iron nozzle (customers can choose steel nozzle or iron nozzle),The above electrostatic spray gun and then with the paint delivery pump,paint filters,paint regulator valve, can constitute a complete set of liquid electrostatic spraying equipment, paint  bucket into the paint ,you can start spraying.

1. Gun weight is only 470g, is the industry's lightest electrostatic spray gun.
2. According to ergonomic design, lightweight, good grip, good hand operation. Long time operation, not easy to feel tired.
3. The spray adjustment valve is located on the left side of the gun, allowing the user to operate.
4. The use of new high-fogging white iron nozzle, can improve productivity and meet the requirements of high-quality coating surface.
5. Needle and seat with wear-resistant tungsten copper, can extend the service life.
6. Body with high-pressure resistance of the material, The handle is made of low-impedance composite material. Body structure than the general design of 1 cm long, effectively reduce the phenomenon of paint backflush. 
7. Safety circuit design, operation error or abnormal voltage and current, the circuit protection system will automatically power off, discharge and buzzer alarm. Improve operational safety. And will not burn damage to the body.
8. High security: because the built-in high-voltage generator in the main body of the gun, so to achieve a high security:
9. Excellent processing: equipped with excellent direct injection and far-reaching reach of the nozzle. can achieve high efficiency advanced
10. high efficiency: with excellent direct injection and far-reaching reach of the nozzle. can achieve high efficiency;
11. easy to use comfortable feel: As a result of resin body with lightweight, handle streamlined design, ergonomic, handle just in his hand, do not feel tired for a long time ;
12. a variety of adjustment and adjustment device: turn the regulator, you can easily adjust the amount of paint spray and spray, convenient and quick;
13. Fan-shaped nozzle (flat blowing nozzle) for: automotive, electrical appliances, large flat and dead angle and other electrostatic paint spray
14. Steel nozzle for transparent/ general paint spray
15. White iron round nozzle high-coated, high efficiency, high atomization, suitable for transparent paint liquid electrostatic spraying;
16. Metal round with a tooth nozzle for electrostatic liquid transparent paint, paint, metal paint and other paint spray good operating performance: spray the left side of the valve to adjust the adjustment easy.
17. high efficiency spray:a new low-pressure high-atomization nozzle,can improve the painting rate, a substantial savings in paint
18. long life:paint valve seat and the use of wear-resistant tungsten steel, can be used for a long time is not easy to replace
19. reduce the paint back to the package: the body structure than the general design of 1 cm long, effectively reduce the phenomenon of paint back to the package.
20. high security : the operation error or the occurrence of abnormal voltage, current, the circuit protection system will automatically automatic power, discharge and buzzer alarm, improve job safety.
21. Parts maintenance easy to change: spray gun parts to achieve a unit, easy to replace, low failure rate, maintenance parts cheap
22. Water spray paint spray gun use(manual liquid air spray gun,spray gun,water-based paint electrostatic spray gun)

Spray gun factory after strict testing, there is no quality problems, so there is no after-sales service.