| Customization: | Available |
|---|---|
| Air Pressure: | 20-29 PSI |
| Application: | Automotive Painting, Furniture Finishing, Industrial Coating, Metal Spraying, Wall Painting, Woodworking |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The gun body is made of ADC12 alloy. It is hot-formed by a 500T Nissan die-casting machine using a special mold. The air inlet interface adopts the design method of in-line hose, which reduces the customer's installation time and maintenance time. If equipped with our company's professional paint connector, the model is ACC. It only takes 5 seconds to replace a spray gun.
The spray gun nozzle is made of 304 stainless steel, which is resistant to corrosion and abrasion. At the same time, it is equipped with a compound needle with a patent number of CN107081232A to adapt to special performance coatings. Such as: ceramic coatings with high abrasion performance, PTFE coatings, water-based coatings with high solid content, special coatings containing sand and so on.
The air cap is made of environmentally friendly copper alloy after five-axis CNC machining. Each atomizing cap has undergone professional testing and test spraying to prevent poor atomization during spraying, thereby reducing the defective rate caused by spray gun spraying in production.
According to different installation methods, the spray gun body is designed with a Φ16mm mounting hole to fit the mounting bracket for general scenes, or it can be used with our company's professional mounting bracket.
DD-5 is a paint efficient series spray gun, using the most advanced atomization technology -PP atomization technology, combining the advantages of traditional and HVLP spray gun, its atomizing cap air pressure of about 1.2-1.3 bar; The paint transfer efficiency is more than 65%, but the air consumption is lower than the traditional spray gun (295 liters per minute, intake pressure 2.5 bar), the operation is very close to the traditional spray, the installation hole position is 16 mm, directly replaced on the original gun, without any operation, the own paint circuit, to prevent the accumulation of paint, to avoid cleaning unclean situation.
All the data in the table are collected from CNISOO / CNSEIKO laboratory. The test fluid is tap water with PH = 7, the coating pressure is 1Bar, and the pipeline is directly connected. The atomized particle data is laser diffraction.
Form 1:
| Model | DD-1/DD-1S |
| Nozzle Diameter (mm) | 0.4/0.7/0.9/1.1/1.4/1.7 |
| Air Consumption (l/min) | 200-550 |
| Output (ml/min) | 0~320 |
| Pattern Width (mm) | 280@H=350mm |
| Air Cap Model | Five-axis machining forming a spray cap |
| Supply System | Type of pressure stable and paint filter |
| Mounting hole diameter (mm) | ¢16mm |
| max paint pressure | 0.7Mpa |
| atomization air pressure | 0.1-0.4Mpa |
| air inlet pressure | MAX0.5Mpa |
| pressure of switch spray gun | 0.35-0.5Mpa |
| air consumption | 200L/min |
| paint output | 10-550ml/min |
| sprinkling width | 200mm-280mm |
CNISOO brand was founded in 2004, after 20 years, focusing on the development of non-standard coating process and peripheral equipment and parts in the coating industry. With independent intellectual property rights of processing technology and professional fluid research and development experience. Excellent R&D experience in gaseous and liquid mixed fluids. Products include spray gun, fluid transfer, spray control system, special spraying workstation, new environmental protection paint mist treatment station, valet design spraying process, spray system upgrade and other service areas. It has a number of patents and belongs to national high-tech enterprises. At the same time, it is a spray R&D partner of many universities.
The products are widely used and solve the complex process of glaze, water-based spraying, enamel, ceramic glaze and other applications . It also solves the application problems of intelligent micro workstation for multiple automotive spraying processes.
The company has proofing research and development equipment,which can quickly mold experimental spraying new concepts. With its own R & D team, we can develop customized spraying tools and systems to meet the market demand.
Only need a solenoid valve to complete the control of high efficiency automatic external control gun,Simultaneous meeting the external control and interal tune.Independent spray width and atomization control valve.
Tail with micrometer scale valve, precision adjustment,to ensure the accuracy of the amount of coating.
VOC2 emission reduction of at least 35%
High wear-resistant tungsten carbide needle mouth
Ultimate fine atomization 35 microns
Paint transfer efficiency is 65% or higher
Atomization pressure 1.8Bar
Provincial paint 15%
Spray gun factory after strict testing, there is no quality problems, so there is no after-sales service.
){kind=link}